|165 º Hinge – Overlay (I)||H165-1 (l)||Ø 35 mm||Nickel Plated|
|165 º Hinge – Half Overlay (I)||H165-2 (l)||Ø 35 mm|
- Drill out the cavity in the shutter as per the dimensions in Fig 1, using the ‘Ebco’ drilling jig. Do not chisel.
- Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter.
- Mark the holes in the cabinet for mounting plate as per Fig 2 and screw on the mounting plate.
- By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.